Baker Drivetrain N1 Shift systems drums are also popular with handshifting bikes where finding neutral without doubt or error is critical to safety or riding for smooth shifting and is available for 5 and 6-Speed Motorcycle transmissions.  Make note that if you purchased your BAKER Six-Speed Custom Motorcycle after June, 2000 that you will need the BAKER OD6 Shift Drum for your applications.  If you purchased your unit prior to that date you need to buy the Baker Drivetrain N171-6 Shift Kit. The N181-6 has the bearing installed into the female end of the drum and the Baker Drivetrain N171-6 Shift Kit comes with 6061-T6 pillow blocks and a torsion-spring-loaded detent system.  Parts Numbers for the N1 pattern 6-speed Drum are p/n N181-6 and p/n N171-6 for the 6-speed Shift Kit . For the 5-Speed: BAKER Drivetrain N1 Shift Drums are available for stock or Baker custom motorcycle transmission applications as the 80-97 p/n 2-5R-N1 and 98-up p/n 2-5RL-N1.  For more information and to ensure that you order the correct parts, Contact Baker Drivetrain Premium Drivetrain Innovations for American Motorcycles and tell em that Boss Hawg sent ya.

Boss Hawg

All HHI Hellrazor handlebar kits include:  1-1/2″ diameter bars, in either Chrome finish or Black finish, Chrome or black hand controls, hydraulic brake and clutch, 3 Button switch housings same as factory functions, Fully internal wiring harness with factory plug and play connections, Hydraulic brake and clutch connections with stainless steel braided lines.  Best of all Hawg Halters offers the Hellrazor Handlebar kits in 3 styles to choose from…Demon, Extreme Bend and the Bad Bagger.  Prices start at US$1699.  Please contact Mark or Beth at Hawg Halters with any questions.

Boss Hawg

“My 2008 HD Crossbones is my baby. I have put PM Factor Contrast Cut Stealth wheels, rotors and pulley on it. Also sporting XO Prodox Shooter grips, highway pegs and shifter pegs. One off custom made front axle nut covers. Love the sound of it from the Vance & Hines Big Radius pipes, the Kuryakyn Hyper-charger and the power commander. Changed the sprung seat to a more lean, lower chopper style seat. There is custom pin-stripping on the horn cover. This bike is definitely not your typical chick bike. Gotta love it. Ride safe and ride often.”

Great job Rhonda, because of you being the Performance Machine April Bike of the Month Winner, you have gained an entry into the PM Bike of the Year Contest and on the homepage of the PM website at Performance Machine.  For the rest of ya, get off your duffs and get in the next Performance Machine Bike of the Month Contest for May when it is announced later this month and submit your ride to maybe win PM Bike of the Month.

Boss Hawg

Related Articles:

Performance Machine Bike of the Month Contest … Call for Entries

Performance Machine April Bike of the Month Winners

The 4^th Annual Arlen Ness Bike Show and Parts Extravaganza will be hosted at the San Mateo County Event Center. Click here for Convention Center information. (Opens a new Window.)  I am told that the vendor booths are almost full and that Arlen needs your commitment.  There is 25,000 square feet of Swap Meet Space for bikers that love swap meets and they will be looking to buy that hard to find piece to restore or an old sled or that slightly used part for a great deal.  Remember, if they didn’t get it for Christmas…motorcyclists alike will be coming to this two day show with thousands of avid motorcycle enthusiasts looking to buy.  Get the details and reserve your space now at 952-746-7786.

The entire Ness clan will be on hand to show off their new projects.  Yep, Arlen Ness, Cory Ness and Zach Ness….3 generations of Master Builders to show off their new custom motorcycles builds and parts. Michael Lichter will be taking photos of what you will see at the Arlen Ness Bike Show. So don’t miss the show!  Mark Your Calendar Now!  April 17, 2010 All Day Saturday from 10AM – 8PM and April 18, 2010 All Day Sunday from 10AM – 5PM.  4^th Annual Arlen Ness Bike Show and Parts Extravaganza.  American Thunder Promotions produces the Arlen Ness Bike Show… American Thunder Promotions is headed up by Neil Ryan and produced by his team of seasoned experts. Custom Chrome and RV Insurance America are the sponsors.  Get the details by calling 952-746-7786 and tell‘em Boss Hawg sent ya.

Related Article: Arlen Ness Debuts Arlen Ness 40th Anniversary Custom Motorcycles Parts and Apparel Catalog

“Always Innovate, Never Imitate.” Do you know that quote? Well it is Arlen Ness celebrating 2010

Arlen Ness and Cory Ness have taken the past year and half dedicating a tremendous amount of resources, time and energy into their Research & Development to bring their new custom motorcycle parts to the forefront. Both Cory and Arlen agreed to concentrate on bolt-on products with two new product lines which are the Deep Cut and Retro. Both of these product lines feature a full range of parts designed together to allow you to customize your bike one piece at a time or all at once.  2010 also introduces a revamped wheel offering including four new styles… Deep Cut motorcycle wheels, Retro motorcycle wheels, G3 motorcycle wheels, and Engraved motorcycle wheels to go along with the Arlen Ness 40th Year Anniversary Custom Parts Catalog.  Stay abreast of Arlen’s new products and the expanded Big Sucker breathers and introduction of the Big Shot II new header systems and slip-on mufflers.  Please order a copy of the Arlen’s 40^th Anniversary Catalog.

Boss Hawg

As promised, please take a look at the three winners of the Performance Machine’s April Bike of the Month contest here at Boss Hawg Blawg. They are as follows:

1. Jim E.’s 2010 HD Street Glide

Jim’s 2010 HD Street Glide features the following PM products:

- Contrast Cut Heathen wheels
- Matching rotors
- Renthal grips
- Chrome bag latches

And here’s Jim’s statement about his bike:

“ I am happy to report that my wife picked out the wheels on this bike!  That is a big deal, as the first time she rode it, we had to pull over so she could vomit-it made her motion sick! The bike was purchased REALLY new (was only 2 weeks off assembly line) from Adamec Harley in Jacksonville. Maiden voyage was to St. Augustine, FL and she refused to ride it again, until I put on a detachable sissy bar.  Motion sickness solved-off to Daytona for Biketoberfest.  While at Biketoberfest (with my bone stock Street Glide), my buddy decided to buy a chopper-which kinda made my bike look..well..stock.  While walking around Destination Daytona, we started looking at wheels, and my wife fell in love with the PM wheels.  If I wanted new wheels, those had to be the ones! While waiting for the wheels/tires/rotors to be installed, I went ahead and put on PM bag latches, PM grips, and a Kuryakyn curved license plate frame.  When we got home, the bike went straight to HD to get the front end chromed out, Covington Cycle fork bells, and lowered 2.5”. Still a work in progress, but at least the wife doesn’t get sick & she loves the wheels!”

2.  Rhonda H.’s 2008 HD Crossbones

Rhonda’s 2008 HD Crossbones features the following PM products:

- Stealth Contrast Cut Factor wheels
- Stealth Contrast Cut Factor Brake Discs
- Stealth Contrast Cut Belt Sprocket

Here’s Rhonda’s statement about her bike:

“My 2008 HD Crossbones is my baby.  I have put PM Factor Contrast Cut Stealth wheels, rotors and pulley on it.  Also sporting XO Prodox Shooter grips, highway pegs and shifter pegs.  One off custom made front axle nut covers.  Love the sound of it from the Vance & Hines Big Radius pipes, the Kuryakyn Hyper-charger and the power commander.  Changed the sprung seat to a more lean, lower chopper style seat.  There is custom pin-stripping on the horn cover.  This bike is definitely not your typical chick bike.  Gotta love it.  Ride safe and ride often.”

3.  Richard A.’s 2009 HD Street Glide

Richard’s 2009 HD Street Glide features the following PM products:

- Performance Machine Contrast Cut Torque wheels
- Contrast Cut Torque rotors
- RSD handlebars (powder coated black before offered to the market)
- Performance Machine Renthal Grips
- Touring Mirrors
- Speaker Covers
- Fuel Door
- Floor boards
- Brake and Shift lever
- Pegs

And here’s Richard’s statement about his 2009 HD Street Glide:

“My 2009 FLHX Street Glide is my 1st Harley Davidson bought brand new as well as my 1st Touring Bike, I have owned only used Harley by the past, It was difficult to choose the right parts (among all the Aftermarket parts available for Touring Bikes) and get the right harmony between Black & Chrome ! Took me some time to think it over and put it together;

Changes include:

Complete New Black Paint, Legend Air Rear Suspension, Front lowered 2 inches with Flush Mount Axle, Vance & Hines Exhaust with Rush Slip Ons, Stage 1, Screamin’Eagle Black Air Filter, PM Torque Wheels & Front Rotors, Sound Amplifier/Speakers updated, P.M Speakers Grills, RSD Handlebar powder coated black with all internal cables to have a clean look, Console powder coated in black with with P.M. Fuel Door, Complete Back of a 2009 CVO Road Glide, Lepera Seat, P.M. Floorboards & Controls, P.M. rear pegs, Black Leather Dash, Hidden Antenna, P.M Black Mirrors…”
I have tried to set my FLHX aside from the others while keeping it sober”

Now be sure to cast your votes for the custom motorcycle that you believe should win the Performance Machine Custom Motorcycle April Bike of the Month top honor and receive the PM $100 Gift Certificate.  Votes must be submitted no late than 5:00 p.m. Pacific Time on Friday, April 2, 2010. The winner of the April Bike of the Month contest will move on to be entered in the Performance Machine Custom Motorcycle of the year contest.  Be sure to see the winners posted and announced here at Boss Hawg Blawg as it happens.

Boss Hawg

Related Article:
Performance Machine Bike of the Month Contest … Call for Entries

Performance Machine Contour Passenger Floorboards come standard with premium materials and features such as Machined Billet Aluminum Running Boards, Billet Aluminum Hinges, Heavy Duty Vibration Resistant Rubber Foot Pads embossed with the PM logo that are designed for 1993 – 2010 Harley Davidson FL Models.  These special priced Contour Passenger Floorboards come either Chrome or Black Anodized finishes for $150.00 per set…wow!  Get em while you can because this offering is limited quantities and are first come first served…I am told there are not many left so you need to hurry.  Make note though that these can only be purchased through the Performance Machine Online Store at Ebay so don’t bother calling.  Boss Hawg

Here’s how it works.  Enter your bike in the April contest by submitting one or two photos of your ride to Marketing Media. Performance Machine staff will review all submissions and choose the top three custom motorcycles based on the loud and proud use of Performance Machine products!  Performance Machine will then post the top three picks (in no particular order) on their Custom Motorcycle Parts Blog so as all Performance Machine fans will have a chance to vote for the April Motorcycle of the Month.  The winner whose bike receives the most votes in an online poll will have his or her custom motorcycle featured on the Custom Motorcycle Parts Blog and will receive a $100 gift certificate towards any Performance Machine products.

Now we all know how some of us bikers are, so make note that some rules and conditions do apply, therefore, in order for any Performance Machine accessorized Custom Motorcycles to be entered and considered for April 2010’s PM Bike of the Month honors the following applies:  1. Your bike must have Performance Machine products.  2. You must submit at least one (1) original photo — but no more than two (2) original photos — of your bike via email to Marketing Media.   3. By submitting your photo(s), you must agree that the photo(s) do not infringe upon or violate the copyright, trademark, publicity, privacy, or other rights of any third party, and that you grant permission to Performance Machine, Inc. to use your photos on their custom motorcycle parts blog, Performance Machine web site and other Performance Machine, Inc. controlled sales and marketing mediums at its choosing in perpetuity.  4. All entries for April’s contest must be received by 4:00 p.m. Pacific Time on Friday, March 26, 2010.  5. All entries must include a 150-300 word written description related to the installation of PM products on the bike in question. 6. One (1) entry is allowed per person.

There are only three days remaining to enter, so submit your photos and write-up today for the Performance Machine Custom Motorcycle April Bike of the Month contest.  Entries must be received by 4:00 p.m. on Friday, March 26.  Then, be sure to check back Monday, March 29, to see if your bike made it into the top three, and then cast your vote for who should receive the Performance Machine Custom Motorcycle April Bike of the Month top honor!  Good luck and all the best, Boss Hawg.

The crystal-clear rhinestones are set within the Harley Davidson Bar & Shield logo medallion placed in the center of a mirror-polished chrome fuel console door and these crystal clear rhinestones add a brilliant flash, and dance in the direct sunlight making you motorcycle stand out front and center to attract maximum attention.  These new Diamond Ice Collection Fuel Tank Console Door accessories fit 2008-later Ultra Classic, Electra Glide, Street Glide, Road Glide and Trike model motorcycles.  Make note that several other motorcycle accessories are also available within the new Diamond Ice Collection are gauge trim rings, a license plate frame and a fuel cap medallion, each set with sparkling rhinestones to make your motorcycle bling complete.  For additional information on Harley-Davidson Genuine Motor Accessories and Women Riders, see the Harley-Davidson Dealer Locator to visit your local dealer or visit the Harley-Davidson Web site or you can call toll free 1-800-443-2153 in the U.S.A. or Canada and to find out more regarding fitment details.  Please click on the photo for an enlarged view.  Boss Hawg.

The Ultra Sucker provides provide far greater airflow and is part of the world famous line up of custom motorcycle products offered from Wimmer Machine.  Increased performance and looks form this totally CNC made in USA intake.  Rain protection also available.  There are also two types of breathing systems.  Their patented top breathers or the new IBS totally enclosed system.  The choice is yours.  The CNC machined billet intake is available in several finishes…luxurious chrome, polished or black anodized.  The easy-to-service “lifetime” filter is available in four different colors… red, blue, black and purple.  Rain socks are available for nasty weather riding.  You can mix and match to achieve your desired look.

When it comes to aftermarket intakes for custom motorcycles and Harley Davidson, Wimmer Machine continually outperforms its competition.  For more than a decade, Wimmer Machine has stayed on the cutting edge of technology, producing some of the best custom motorcycle air intakes on the market.  These  intakes not only look great, but will also increase the performance and horsepower of your bike…guaranteed! “We proudly stand at the top of our industry as the King of Intakes,” exclaimed Lee Wimmer, founder and president of Wimmer Machine and Wimmer Custom Cycle. Custom motorcycle builders and Harley Davidson motorcycle riders alike use Wimmer Machine and Wimmer Custom Cycles air intakes and velocity stacks for show and performance everyday.  Take a look, you may just want an Ultra Sucker Velocity Stack and Air Breather. Contact them at 1.215.721.4110  or Toll Free 1.866.HOT.CYCLE and tell the men there that Boss Hawg sent ya.

Boss Hawg